Schlage Sense Pro™: Perform a Jump Start

USB-C jump start port is located on the bottom of the touchpad​

 

To Perform a Jump Start:​

1. Move the rubber cover out of the way​.
2. Plug USB-C cable into a phone or another power source​.
3. Plug USB-C cable into the port on the ​Schlage Sense Pro™.
4. Lock will show the power-on UI​
5. Unlock using NFC or User Code
6. The lock will beep three twice. The keypad will illuminate, and the light bar will cycle white, red, yellow, blue, then white, followed by the Schlage logo.

Compatible Jump Start Devices:

• iPhone 15 and later
• Android phones with USB-C charging port
• USB battery pack
• USB-C wall charger
• Laptop
• iPad or other tablet

iPhone with lightning connector are not compatible.