Pre-Installation Steps for Installing a Schlage Lock

Before installing your Schlage lock, it's important to follow a few pre-installation steps to ensure a smooth and successful setup. Here's a quick guide to help you prepare.

Pre-Installation Steps:

Unbox and Organize Components:

Open the box and lay out all the components. Make sure that each item, including the lock, latch, strike plate, and any additional hardware, is accounted for.

Check for the Key:

Ensure that the key is included in the packaging. Test the key in the lock cylinder to confirm it operates smoothly before installation.

Verify Screws and Hardware:

Confirm that all screws and necessary hardware are present. This will prevent any interruptions during the installation process.

Review Installation Instructions:

Take a moment to read through the installation instructions provided by Schlage. Familiarizing yourself with the steps can help avoid mistakes.