How to Enable and Disable the Beeper on Schlage Keypad and Touch Locks

The beeper on your Schlage Keypad or Touch lock provides audible feedback for keypresses and other actions, enhancing the usability of the lock. However, you may choose to disable the beeper for a quieter operation. Note that even when the beeper is turned off, it will still sound to indicate a low battery. Also, keep in mind that the beeper may not be audible to everyone. If you would like to view interactive instructions, please click here.

Steps to Enable or Disable the Beeper

• Enter the Programming Code
  Begin by entering the six-digit programming code on the keypad. This code allows you to access the lock's programming features. After entering the code, wait for the keypad to signal with three orange lights and three beeps, indicating readiness for the next step.
• Press the Schlage Button
  Press the Schlage button on the keypad. This action will illuminate the keypad, confirming that you are in programming mode.
• Press the Number '5'
  Press the number '5' on the keypad. This tells the lock to toggle the beeper setting. Upon successful change, the lock will signal with one green light and a long beep.

By following these steps, you can easily manage the beeper setting on your Schlage Keypad Lock, tailoring the lock's feedback to your preference.