How to Manually Delete All User Codes on Your Schlage Encode Lock

Keep in mind that if the Encode lock is paired with the Schlage Home app, all programming must be done through the app, as pairing the lock with the app deletes the programming code. It is recommended to manage your codes within the app for a more streamlined and efficient experience.

If you need to clear all user codes from your Schlage Encode Lock, follow these step-by-step instructions:

• Enter the Programming Code:
  Start by entering your 6-digit Programming Code on the lock's keypad. This code allows you to access the programming mode necessary for making changes to your lock's settings.
• Initiate the Code Deletion Process:
  Press and hold the lock icon with an X on the keypad.
  This action signals the lock that you intend to delete all user codes.
• Confirm the Deletion:
  While continuing to hold the Lock icon, press the House icon with a check mark.
  This combination of button presses initiates the deletion process.
• Complete the Process:
  Release both buttons. Then, choose "Confirm" (house icon with a check mark) to finalize the deletion of all user codes, or select "Cancel" (lock icon with an X) if you decide not to proceed with the deletion.

By following these steps, you can successfully delete all user codes stored in your Schlage Encode Lock. After completing this process, you will need to reprogram any necessary user codes to ensure continued access to your lock.