How to Adjust the Alarm Sensitivity Level on the Schlage Connect Lock

Each alarm mode is set to a default sensitivity level of 3. If the alarm sounds too frequently or not frequently enough, consider adjusting this setting.

Enter Sensitivity Adjustment Mode:

• Press and hold the inside Schlage button.
• Release the button after the third flash (about 10 seconds).

Cycle Through Sensitivity Settings:

• Press the Schlage button to cycle through sensitivity levels.
  The button will flash and beep from 1 to 5 times to indicate the current sensitivity setting.
  For example, if it flashes and beeps 3 times, the sensitivity is set to level 3.

Select Your Desired Sensitivity Level:

Stop pressing the Schlage button when you reach your desired sensitivity level.

By following these steps, you can customize the sensitivity level of your Schlage Connect lock to better suit your security needs.