How to Reverse the Handing on the Schlage Encode Lever

The Schlage Encode Lever (FE789) is designed with reversible handing, making it easy to adapt the lever direction for both left-handed and right-handed doors. Whether you're installing the lock for the first time or need to adjust the handing, this guide will walk you through the process step by step.

Tools You’ll Need:

• 9-Pin Tool: Included with your lock.
• Alternative Option: If you no longer have the 9-pin tool, an unfolded paper clip can be used as a substitute.

---

How to Reverse the Encode Lever Handing:

---

1.  Locate the Circular Opening
   Find the small circular opening on the stem of the lever. This is where you’ll insert the 9-pin tool or paper clip.
2.  Insert the 9-pin Tool
   Insert the 9-pin tool (or paper clip) into the circular opening.
3. Press the Pin
   Push the pin inward until you feel the lever release from the stem.
4. Remove the Lever
   Once the pin is pressed, pull the lever toward yourself, away from the door, to remove it.
5. Repeat for the Other Side
   Repeat the same process on the opposite lever to remove it from the door.
6. Reinstall the Levers
   With both levers removed, place each lever on the correct side of the door to match the desired handing. Once the levers are lined up, press or push them into place. You should hear a click, indicating that the lever has been secured properly. To confirm, gently pull on the lever to ensure it is firmly attached.

---

Tips for Success 

---

• Ensure you press the pin firmly until the lever releases.
• Double-check that the levers are correctly aligned when reinstalling them.

By following this guide, you can quickly and efficiently reverse the handing of your Schlage Encode Lever to suit your door’s configuration.