Schlage Keypad Deadbolt (BE365): Using the Key

The Schlage Keypad Deadbolt (BE365) has a floating cylinder. 

To Use the key on the Keypad Deadbolt (BE365):

1.  Place the exterior thumb-turn in the 12 to 6 o'clock position 
2. Insert the key, push in slightly.
3. While holding the thumb-turn stationary, twist the key to the 3 to 9 o'clock position. 
4. The key and center cylinder should slide back about 1/8".

To Remove the Key:

1. Hold the thumb-turn stationary again
2. Return the key to the vertical position.
3. Pull back on the key and turn.

Version 1.2